6.0.10.7.30.1
- 01:80:C2:00:00:00
  01:80:C2:00:00:02
  01:80:C2:00:00:0E
  01:80:C2:00:00:03
  changed to DROP

6.0.10.7.30
- get/set_sw_remain
- Defaulted to remain switch configuration
(sw_remain enabled)

6.0.10.7.29
- Changed fefault ports attributes to 
loopback suppresion disable
- Changed VLAN's attributes to 
reflect enable
- Changed mcg attribute to
L3 switching only mode.

6.0.10.7.28
- Added commands 
set_rframe_update 
get_rframe_update <port>
set_ttl_update <port> <val>
get_ttl_update <port>
- Changed "routed frame changed field" to VLAN only
- ttl decrement defaulted to disable. 

6.0.10.7.27
- Changes in CPS CISCO init (timing).

6.0.10.7.26
- Changes in CPS CISCO init.

6.0.10.7.25
- Added support for set/get_port_parser

6.0.10.7.24
- Added mcast group commands (preliminary) 

6.0.10.7.23
- Added support fo SPC CISCO

6.0.10.7.22.1
- Fixed recv for fci_read

6.0.10.7.22
- Added support for get_port_speed

6.0.10.7.21
- Removed debug snapshot (rdifd)

6.0.10.7.20
- Added support for 100G-LR/40G-LR
detection printout.

6.0.10.7.19
- Configure dfe mode for lane 1...3
  after transceiver insertion.

6.0.10.7.18
- Fixed interrupts issue.

6.0.10.7.17.1
- Fixed mpls_header_mask parameter (rdifctl only).

6.0.10.7.17
- Added support for mpls_header field.

6.0.10.7.16
- Added support for fixed VF ports for all PEPs.

6.0.10.7.15
- Added add_vlan_promisc/rem_vlan_promisc command.

6.0.10.7.14
- Added mir_add_vlan command.
- Added set_vlan rule.

6.0.10.7.13
- EPL VLAN strip disabled.
6.0.10.7.12
- Fixed per-port sfp read.
- Added mir rule.

6.0.10.7.11
- Added support for multi-host.

6.0.10.7.11
- Added support for multi-host.

6.0.10.7.10
- Moved to class-base flow control.

6.0.10.7.9
- Added support for 1G x557.

6.0.10.7.7
- Fixed issues with non-verbose mode.
- Fixed issue with mir & multiple devices.

6.0.10.7.6
- Fixed double vlan tag(tag 0 issue).

6.0.10.7.5
- Fixed rule query entry.

6.0.10.7.4
- Fixed problem with LBG and zero port list
- Removed unsupported for mapped LBG 
lbg_query_port_list
- Increased up to 32 LBG group members. 

6.0.10.7.3
- Fixed LBG distribution table
- Fixed lbg_del command
- Added load balance rule (lb)

6.0.10.7
- Fixed stop for non-verbose mode

6.0.10.6
- Fixed getPortState for PEP (focalpoint lib) 
- Fixed port stat command
- Demonize after full Swith init

6.0.10.5
- Disable tag strip for vlan tags 2..4095
(for ingress PEP interfaces)
- Fixed acl for ingress PEP interfaces
- Added fixed VF for PEP2
- Removed ACL compile printout

6.0.10.4.10
- Added FCI init sequence support in config file on/off(default is off):
Example:
api.platform.config.switch.0.fci text on


6.0.10.4.9ti
- Removed FCI init

6.0.10.4.9i
- Setted to optical mode
- Removed debug printout on link down event
- Moved FCI settings before port setting

6.0.10.4.8i
- Added support for fci settings
- Changes in i2c handler (cpld ver.5)

6.0.10.4.7i
- Remove I2C LOG printout on non-debug mode.

6.0.10.4.6i
- Added PORT_STATUS, IP_LINK, MAC_ERROR_COUNTER
on Link Down event

6.0.10.4.5i
- Removed accept... printout
- Added date & time printout on link change event 

6.0.10.4.4i
- Added vrm delta support (cfg file, mVolt)
example:
	api.platform.lib.config.hwResourceId.7.vrm.delta int 6
- Added eee_mode support (cfg file, on/off)
example:
	api.platform.config.switch.0.portIndex.2.eeeMode text on
-Added link_optim_mode support (cfg file, balance(default)/speed/quality/none)
example:
	api.platform.config.switch.0.portIndex.1.linkOptimMode text quality
	
	
############################################################################	
4.4
-Added link_optim_mode support (cfg file, balance(default)/speed/quality/none)
example:
	api.platform.config.switch.0.portIndex.1.linkOptimMode text quality

4.3
- Added vrm delta support (cfg file, mVolt)
example:
	api.platform.lib.config.hwResourceId.7.vrm.delta int 6

4.2
- Added vrm IR support (some changes)

4.1
- Added vrm IR support

4.0
- Added eee_mode support (cfg file, on/off)
example:
	api.platform.config.switch.0.portIndex.2.eeeMode text on
##########################################################################	


6.0.10.4i
- Added IR vrm support

6.0.10i
- Added fci_rx_read/write

6.0.9i
- Added access to temp. sensor1
- Added fci_read/write

6.0.8i
- IBM
- Added readme for write/read_temp

6.0.7
- Fixed problem with entering abnormal dev parameter
in query command (rifd).
- Removed debug printout on mirror command (rdifctl, librdi).
- Removed fatal printout connected to bprdctl_mod (fm lib).
- Fixed VF port numbering for 2nd port GLORT.

6.0.5
-Fixed clear command (rdifd)

6.0.4
- Fixed clear on deleted egress VF (allowed) 
- Fixed remove on deleted egress VF (not allowed)
- Fixed return from get_port_state  - 
    now return fail for non-exist interface 

6.0.3
- LLDP allowed

v6.0.2
- Added support for 8x25/8x10 port mask.

v6.0.1
- Added mir_query_list, mir_query_port_list, mir_create,
mir_add_port, mir_del_port, mir_del.
- Added set_prio support to query rule printout. 

v6.0.0
- Added set priority rule.
- Added frame priority statistics.
- Added reset statistis counter.

v5.0.8
- Fixed query_list.
- Added LBG support.

v5.0.7.1
- Fixed wrong start script.

v5.0.7
- Added mux semaphore support.

v5.0.6
- Added link prop. (system side).

v5.0.4
- Added support for PRBS test.
- Fixed vlan issue on PEP.

v5.0.2
- Max Frame Size increased to 15360.

v5.0.1
- Added support for get_temp.

v5.0.0
- Added support for simultaneous work 2x40 & 4x10 
Bypass adapters.

v4.0.2
- Fixed rule count issues.

v.3.0.4
- Added support for vir interfaces. 

v.3.0.1
- Added support for multi switch mode 

v.3.0.0
- Initial version

